USEV: Created page with "=== ''' Short Description ''' === The meter is used for the measurement of total volatile organic compounds and formaldehyde (HCHO). The formaldehyde meter is characterised by its large display and simple operation. === ''' Parameters (accuracy)''' === Formaldehyde (HCHO): 0-5.00 mg·m-3 / ppm; ±5 % VOCs: 0-9.99 mg·m-3/ ppm; ±5 % === ''' Requirements''' === In addition to the value on the display, an alarm can be detected optically, as the display lights up red..."

2023-07-28T10:05:28Z

Created page with "=== ''' Short Description ''' === The meter is used for the measurement of total volatile organic compounds and formaldehyde (HCHO). The formaldehyde meter is characterised by its large display and simple operation. === ''' Parameters (accuracy)''' === Formaldehyde (HCHO): 0-5.00 mg·m-3 / ppm; ±5 % VOCs: 0-9.99 mg·m-3/ ppm; ±5 % === ''' Requirements''' === In addition to the value on the display, an alarm can be detected optically, as the display lights up red..."

New page

=== ''' Short Description ''' ===

The meter is used for the measurement of total volatile organic compounds and formaldehyde (HCHO). The formaldehyde meter is characterised by its large display and simple operation.

=== ''' Parameters (accuracy)''' ===

Formaldehyde (HCHO): 0-5.00 mg·m-3 / ppm; ±5 %

VOCs: 0-9.99 mg·m-3/ ppm; ±5 %

=== ''' Requirements''' ===

In addition to the value on the display, an alarm can be detected optically, as the display lights up red when a critical VOC or HCHO value is detected. The meter is equipped with a lithium polymer accumulator which guarantees several hours of operation.
The device needs a warm-up phase of 90 seconds to display stable measured values.

=== ''' Maintenance/ Calibration ''' ===

Low maintenance. The device has only three keys, which makes it possible to work quickly.

=== ''' Official Website ''' ===

https://www.pce-instruments.com/espanol/
[[Category: Sensors]]

PCE-VOC 1 - Revision history