PCE-VOC 1: Difference between revisions
(Created page with "=== ''' Short Description ''' === The meter is used for the measurement of total volatile organic compounds and formaldehyde (HCHO). The formaldehyde meter is characterised by its large display and simple operation. === ''' Parameters (accuracy)''' === Formaldehyde (HCHO): 0-5.00 mg·m-3 / ppm; ±5 % VOCs: 0-9.99 mg·m-3/ ppm; ±5 % === ''' Requirements''' === In addition to the value on the display, an alarm can be detected optically, as the display lights up red...") |
No edit summary |
||
| Line 21: | Line 21: | ||
https://www.pce-instruments.com/espanol/ | https://www.pce-instruments.com/espanol/ | ||
[[Category: Sensors]] | [[Category:Sensors and Monitoring Methods]] | ||
Latest revision as of 10:48, 10 September 2026
Short Description
The meter is used for the measurement of total volatile organic compounds and formaldehyde (HCHO). The formaldehyde meter is characterised by its large display and simple operation.
Parameters (accuracy)
Formaldehyde (HCHO): 0-5.00 mg·m-3 / ppm; ±5 %
VOCs: 0-9.99 mg·m-3/ ppm; ±5 %
Requirements
In addition to the value on the display, an alarm can be detected optically, as the display lights up red when a critical VOC or HCHO value is detected. The meter is equipped with a lithium polymer accumulator which guarantees several hours of operation. The device needs a warm-up phase of 90 seconds to display stable measured values.
Maintenance/ Calibration
Low maintenance. The device has only three keys, which makes it possible to work quickly.